TLC352IDR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
TLC352IDR Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as Differential .This element consists of 2 elements in total.As a result, it contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC352 .This comparator presents a quiescent current of 400μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 300μA when using the device.A current supply greater than 300μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.In this case, the part is from the LinCMOS? comparator series.The device is acceptable to pack by TR .
TLC352IDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC352IDR Applications
There are a lot of Texas Instruments TLC352IDR linear comparators applications.
- Zero-Crossing Detectors
- Mobile Communications
- Infotainment & cluster
- General-Purpose Portable Devices
- Battery-Powered Electronics
- High-Speed Differential Line Receiver
- Security Detection Systems
- Analog front end
- RC Timers
- Industrial
