TLC352IP
| Parameters | |
|---|---|
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
TLC352IP Overview
Electronic comparator is packaged in 8-DIP (0.300, 7.62mm) for convenient transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .The part is shipped by Tube .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical Differential comparator.Electronic comparator consists of 2 elements in total.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLC352 .In this comparator, the quiescent current is 400μA .The PCB or other board can be mounted using the Through Hole on it.The nominal supply current of the device should be 300μA for normal use.An excess of current supply over 150μA could result in malfunction of the comparator.In order to operate the device, 5V power supplies are sufficient.Comparator electronics is a comparator part from the LinCMOS? series.
TLC352IP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC352IP Applications
There are a lot of Texas Instruments TLC352IP linear comparators applications.
- RC Timers
- Pulse, Squarewave, and Time Delay Generators
- Simple Analog-to-Digital Converters (ADCs)
- Automotive
- Alarm and Monitoring Circuits
- Window Comparators
- Handheld Instruments
- Analog front end
- General Purpose Low Voltage Applications
- Hand-Held Electronics
