Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Output Type |
TTL |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
1.4V |
Power Dissipation-Max |
500mW |
Nominal Supply Current |
300μA |
Power Dissipation |
500mW |
Max Supply Current |
300μA |
Current - Output |
20mA |
Quiescent Current |
400μA |
Response Time |
650 ns |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
20nA |
Input Offset Voltage (Vos) |
5mV |
Max Dual Supply Voltage |
8V |
Min Dual Supply Voltage |
700mV |
Max Input Current |
5pA |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
TLC352IPE4 Overview
In order to facilitate transportation, it is packaged in PDIP .The comparator has a TTL output.The device is designed with 8 terminations.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .As a result, it contains 8 pins.8 pins are available on the comparator.A quiescent current of 400μA is displayed by this comparator.There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 300μA .A current supply greater than 300μA may cause the comparator to malfunction.This device requires 5V power supplies to operate.Electronic comparator is possible to input a maximum of 5pA current into the device.Comparator electronics is not recommended to maintain a temperature above 85°C .Temperature lower than -40°C is not suitable for the it.In the comparator, the maximum supply voltage is 16V .The comparator is capable of operating at a minimum supply voltage of 1.4V .The output quality is maintained by the cooperation of 2 channels.There is essentially a very high gain COMPARATOR amplifier in the comparator.Comparator electronics has a rating of 20mA output current.
TLC352IPE4 Features
TTL output capability
Quiescent Current: 400μA
COMPARATOR amplifier
TLC352IPE4 Applications
There are a lot of Texas Instruments TLC352IPE4 linear comparators applications.
- Portable and Battery-Powered Systems
- General-Purpose Portable Devices
- RC Timers
- Infotainment and Clusters
- Building automation
- Current and voltage sensing
- Multivibrators and High-Voltage Digital Logic Gates
- Ultra-Low Power Systems
- Body Control Modules
- Mobile Phones