banner_page

TLC352IPWG4

Surface Mount Tube 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC352IPWG4
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 449
  • Description: Surface Mount Tube 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Differential
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Max Power Dissipation 500mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLC352
Pin Count 8
Output Type CMOS, MOS, Open-Drain, TTL
Operating Supply Voltage 15V
Number of Elements 2
Power Supplies 1.5/5V
Nominal Supply Current 300μA
Power Dissipation 500mW
Output Current 20mA
Max Supply Current 300μA
Quiescent Current 400μA
Response Time 650 ns
Voltage - Supply, Single/Dual (±) 1.4V~16V ±0.7V~8V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Input Bias Current 5pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 5pA @ 5V
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC352IPWG4 Overview


For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of CMOS, MOS, Open-Drain, TTL .The part is shipped by Tube .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as Differential .There are a total of 2 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.Search TLC352 to find more pin-to-pin solutions.A quiescent current of 400μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 300μA .The device can be powered by 1.5/5V power supplies.A comparator part from the LinCMOS? series is used in this part.The operating supply voltage for normal operation should be 15V .

TLC352IPWG4 Features


CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLC352IPWG4 Applications


There are a lot of Texas Instruments TLC352IPWG4 linear comparators applications.

  • Zero-Crossing Detectors
  • Battery-Powered Electronics
  • General-Purpose Portable Devices
  • Mobile Phones and Tablets
  • Battery-Powered Electronics
  • Industrial
  • High-Speed Sampling Circuits
  • High-Speed Differential Line Receiver
  • Limit Comparators
  • System control and monitoring

Write a review

Note: HTML is not translated!
    Bad           Good