TLC352IPWR
| Parameters | |
|---|---|
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.5/5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
TLC352IPWR Overview
To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.We ship the part through Tape & Reel (TR) .The comparator has 8 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical Differential comparator.A total of 2 elements can be found in it.A total of 8 pins are included.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLC352 .There is a quiescent current of 400μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 300μA .If the current supply exceeds 150μA , the comparator might be damaged.In order to run the device, there are only 1.5/5V power supplies required.In this case, the part is from the LinCMOS? comparator series.Packed in TR , this device is for general uses (often in ADC circuits).
TLC352IPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC352IPWR Applications
There are a lot of Texas Instruments TLC352IPWR linear comparators applications.
- Consumer Medical Electronics
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Wearable Devices
- Factory automation & control
- Current and voltage sensing
- Point of load regulators
