TLC3544CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC3544 |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 3/55V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 2.8mA |
| Number of Bits | 14 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 2, 4 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.75 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 20mW |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 200 ksps |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 81 dB |
| Max Supply Voltage (DC) | 5.5V |
| Min Supply Voltage (DC) | 2.7V |
| Spurious-free dynamic range (SFDR) | 97 dB |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3544CPW Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 20-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 4 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLC3544 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Analog, Digital number.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The ADC converter operates from 3/55V power supplies.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.
TLC3544CPW Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.5V
3/55V power supplies
1 elements
Maximal supply voltage (DC) of 5.5V
TLC3544CPW Applications
There are a lot of Texas Instruments TLC3544CPW ADC applications.
- Rotary encoder
- Telecommunications
- TD-SCDMA, WiMAX
- Battery Operated Systems
- Scientific instruments.
- Digital Storage Oscilloscope
- Medical Imaging
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Music recording
- AC motor control
