TLC354CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC354 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.02μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC354CD Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Electronic comparator is shipped by Tube .The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as Differential .A total of 4 elements can be found in it.As a result, it contains 14 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.Alternatively, you may search for TLC354 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 800μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 600μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 150μA .The device can be run with 5V power supplies.A comparator part from the LinCMOS? series is used in this part.
TLC354CD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC354CD Applications
There are a lot of Texas Instruments TLC354CD linear comparators applications.
- General Purpose Low Voltage Applications
- Point of load regulators
- Ultra-Low Power Systems
- System control and monitoring
- Set Top Boxes
- Zero-Crossing Detectors
- Automatic Test Equipment
- General-Purpose, Low-Voltage Applications
- Wireless Base Stations
- Security Detection Systems
