TLC354CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC354 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.02μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC354CN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) for ease of transportation.There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.The part is shipped by Tube .14 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical Differential comparator.Currently, it consists of only 4 elements.As a result, it contains 14 pins.Through Hole universial mout for easy adapting.The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator is equipped with 14 pins.You may wish to search TLC354 for more solutions that address your specific needs.A quiescent current of 800μA is displayed by this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 600μA .If the current supply exceeds 150μA , the comparator could malfunction.The device can be operated with 5V power supplies.Input current to the device cannot exceed 5pA .In this case, the part is from the LinCMOS? comparator series.
TLC354CN Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC354CN Applications
There are a lot of Texas Instruments TLC354CN linear comparators applications.
- Point of load regulators
- Infotainment & cluster
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- Current and voltage sensing
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
- Set Top Boxes
- Alarm and Monitoring Circuits
- Automatic Test Equipment
