Parameters |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
14 |
Weight |
927.99329mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Pin Count |
14 |
Output Type |
TTL |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
4 |
Max Supply Voltage |
16V |
Min Supply Voltage |
1.4V |
Power Dissipation-Max |
500mW |
Nominal Supply Current |
600μA |
Power Dissipation |
500mW |
Max Supply Current |
600μA |
Current - Output |
20mA |
Quiescent Current |
800μA |
Response Time |
650 ns |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
600pA |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Max Dual Supply Voltage |
8V |
Min Dual Supply Voltage |
700mV |
Bias Current-Max (IIB) @25C |
0.0006μA |
Max Input Current |
5pA |
Height Seated (Max) |
5.08mm |
Length |
19.305mm |
Width |
7.62mm |
TLC354CNE4 Overview
For convenience, it is packaged in PDIP .The comparator has a type TTL output.The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.As a result, it contains 14 pins.There are 14 pins on the comparator.This comparator presents a quiescent current of 800μA .A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 600μA in order to use the device normally.Current supply exceeding 600μA could cause disfunction of the compartator.The device can be run with 5V power supplies.A maximum current of 5pA can be supplied to the device.An increase in temperature over 70°C is not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator is designed to operate at a maximum supply voltage of 16V .There is a minimum supply voltage of 1.4V for this comparator.In order to maintain the quality of the output, 4 channels cooperate together.A comparator consists essentially of a very high-gain COMPARATOR amplifier.This device is rated for 20mA mA output current.
TLC354CNE4 Features
TTL output capability
Quiescent Current: 800μA
COMPARATOR amplifier
TLC354CNE4 Applications
There are a lot of Texas Instruments TLC354CNE4 linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Zero-Crossing Detectors
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- Set Top Boxes
- Threshold Detectors
- Automotive
- Laptop Computers
- Lithium ion battery monitoring
- Portable and Battery-Powered Systems