banner_page

TLC3702CDRG4

Surface Mount Tape & Reel (TR) 20mA mA 2700 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC3702CDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 452
  • Description: Surface Mount Tape & Reel (TR) 20mA mA 2700 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Max Power Dissipation 725mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC3702
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 40μA
Power Dissipation 725mW
Output Current 20mA
Max Supply Current 40μA
Propagation Delay 4.5 μs
Quiescent Current 50μA
Response Time 2700 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 3V~16V
Output Current per Channel 8mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Input Bias Current 5pA
Current - Quiescent (Max) 50μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC3702CDRG4 Overview


Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with a CMOS, Push-Pull, TTL output is used here.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .This element consists of 2 elements in total.Electronic comparator has 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search TLC3702 for more options.As a result, this comparator displays a quiescent current of 50μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current be 40μA in order to use the device normally.A current supply greater than 40μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Comparator electronics comes from the series of LinCMOS? comparator parts.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.The device is acceptable to pack by TR .

TLC3702CDRG4 Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA

TLC3702CDRG4 Applications


There are a lot of Texas Instruments TLC3702CDRG4 linear comparators applications.

  • Power Supervision
  • Mobile Phones
  • High-Speed Sampling Circuits
  • Wireless Base Stations
  • Ultra-Low Power Systems
  • Motor drives
  • Window Comparators
  • Laptop Computers
  • DC/DC and AC/DC power supplies
  • Appliances

Write a review

Note: HTML is not translated!
    Bad           Good