TLC3702CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702CP Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has an output type of CMOS, Push-Pull, TTL .This chip is designed with the Tube package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .The board includes 8 pins.Through Hole universial mout for easy adapting.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.Try search TLC3702 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 50μA volts.The board has a Through Hole for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 40μA .Current supply exceeding 20μA could cause disfunction of the compartator.The device can be operated with 5V power supplies.The maximal current your can input into the device is 5pA .Comparator electronics is part of the LinCMOS? comparator series.Comparator electronics is necessary to have a voltage of 5V for normal operation.
TLC3702CP Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC3702CP Applications
There are a lot of Texas Instruments TLC3702CP linear comparators applications.
- Lithium ion battery monitoring
- Window Comparators
- Battery-Powered Electronics
- Battery-Powered Electronics
- Point of load regulators
- General-Purpose Portable Devices
- Wearable Devices
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- Wireless Base Stations
