Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Output Type |
TTL |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3V |
Power Dissipation-Max |
1W |
Nominal Supply Current |
40μA |
Power Dissipation |
1W |
Max Supply Current |
40μA |
Current - Output |
20mA |
Propagation Delay |
4.5 μs |
Quiescent Current |
50μA |
Response Time |
2.7 μs |
Common Mode Rejection Ratio |
84 dB |
Current - Input Bias |
600pA |
Output Current per Channel |
8mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
84dB |
Bias Current-Max (IIB) @25C |
0.0006μA |
Max Input Current |
5pA |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
TLC3702CPE4 Overview
For convenience, it is packaged in PDIP .A comparator with an output type of TTL is being used.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has 8 pins.The comparator consists of 8 pins.In this comparator, the quiescent current is 50μA .Electronic comparator has a Through Hole for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 40μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 40μA .In order to operate the device, 5V power supplies are sufficient.You are allowed to input a maximum current of 5pA into the device.There is no need to exceed 70°C in terms of temperature.A temperature lower than 0°C is unsuitable for the device.A comparator's maximum supply voltage is 16V .This comparator can be supplied with a voltage as low as 3V .To ensure a high level of output quality, 2 channels work together.Normal operation requires 5V operating supply voltage.A 20mA output current is specified for this device.
TLC3702CPE4 Features
TTL output capability
General Purpose IC
Quiescent Current: 50μA
TLC3702CPE4 Applications
There are a lot of Texas Instruments TLC3702CPE4 linear comparators applications.
- Consumer Medical Electronics
- Motor drives
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Window Comparators
- Self-diagnostics
- Current and voltage sensing
- General-Purpose Portable Devices