TLC3702CPS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702CPS Overview
The product is packaged in 8-SOIC (0.209, 5.30mm Width) to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, TTL .This device is designed in Tube case.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .This element consists of 2 elements in total.The device contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator consists of 8 pins.Search TLC3702 to find more pin-to-pin solutions.There is a quiescent current of 50μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 40μA .If the current supply exceeds 40μA , the comparator could malfunction.A maximum current of 5pA can be supplied to the device.Comparator electronics is a comparator part from the LinCMOS? series.For normal operation, the operating supply voltage must be 5V .
TLC3702CPS Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC3702CPS Applications
There are a lot of Texas Instruments TLC3702CPS linear comparators applications.
- Automatic Test Equipment
- Security Detection Systems
- Ultra-Low Power Systems
- Battery management and protection
- Set Top Boxes
- Factory automation & control
- High-Speed Differential Line Receiver
- Infotainment and Clusters
- DC/DC and AC/DC power supplies
- Laptop Computers
