TLC3702CPSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702CPSR Overview
The product is packaged in 8-SOIC (0.209, 5.30mm Width) for ease of transportation.The comparator has a CMOS, Push-Pull, TTL output.Ready for shipping in Tape & Reel (TR) package.8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching TLC3702 .This comparator presents a quiescent current of 50μA .Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 40μA for normal use.A supply current exceeding 20μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.You are allowed to input a maximum current of 5pA into the device.The part belongs to the LinCMOS? series of comparator parts.Comparator electronics is necessary to have a voltage of 5V for normal operation.The device is packaged in TR and is often used in ADC circuits.
TLC3702CPSR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC3702CPSR Applications
There are a lot of Texas Instruments TLC3702CPSR linear comparators applications.
- Factory automation & control
- Ultra-Low Power Systems
- Zero-Crossing Detectors
- Mobile Phones
- Wearable Devices
- Pulse, Squarewave, and Time Delay Generators
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
- Point of load regulators
- Mobile Phones and Tablets
