TLC3702CPSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Max Input Current | 5pA |
| Input Bias Current | 600pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702CPSRG4 Overview
For convenience, it is packaged in 8-SOIC (0.209, 5.30mm Width) .Output type CMOS, Push-Pull, TTL is used for this comparator.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 2 elements in total.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search TLC3702 for more pin-to-pin solutions.The comparator presents a quiescent current of 50μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 40μA for normal use.A supply current exceeding 40μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.You can input a maximum current of 5pA into this device.The part is from LinCMOS? comparator series.Comparator electronics is necessary to have a voltage of 5V for normal operation.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLC3702CPSRG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC3702CPSRG4 Applications
There are a lot of Texas Instruments TLC3702CPSRG4 linear comparators applications.
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- Limit Comparators
- Portable Battery Monitoring
- Point of load regulators
- Handheld Instruments
- Automatic Test Equipment
- Window Comparators, Multivibrators
- Infotainment & cluster
- Alarm and Monitoring Circuits
