banner_page

TLC3702CPW

Surface Mount Tube 20mA mA 2700 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC3702CPW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 762
  • Description: Surface Mount Tube 20mA mA 2700 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Weight 39.008944mg
Operating Temperature 0°C~70°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Max Power Dissipation 1W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLC3702
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 40μA
Power Dissipation 1W
Output Current 20mA
Max Supply Current 20μA
Propagation Delay 4.5 μs
Quiescent Current 50μA
Response Time 2700 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 3V~16V
Output Current per Channel 8mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Power Supply Rejection Ratio (PSRR) 85dB
Input Bias Current 5pA
Current - Quiescent (Max) 50μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC3702CPW Overview


The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.This comparator is of the CMOS, Push-Pull, TTL output type.The part is shipped by Tube .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type General Purpose .A total of 2 elements can be found in it.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLC3702 .The comparator displays a quiescent current of 50μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 40μA in order to use the device normally.If the current supply exceeds 20μA , the comparator might be damaged.The device can be powered by 5V power supplies.The part is based on LinCMOS? .A normal operation requires a voltage of 5V .

TLC3702CPW Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA

TLC3702CPW Applications


There are a lot of Texas Instruments TLC3702CPW linear comparators applications.

  • Analog front end
  • Pulse, Squarewave, and Time Delay Generators
  • Current and voltage sensing
  • Portable and Battery-Powered Systems
  • Automatic Test Equipment
  • High-Speed Differential Line Receiver
  • Metering Systems
  • Mobile Phones and Tablets
  • RC Timers
  • Battery-Powered Electronics

Write a review

Note: HTML is not translated!
    Bad           Good