TLC3702ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702ID Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Push-Pull, TTL output.The part is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search TLC3702 for more pin-to-pin solutions.There is a quiescent current of 65μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 40μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .There is sufficient power to run the device from 5V power supplies.You are allowed to input a maximum current of 5pA into the device.The part is from LinCMOS? comparator series.In order to operate normally, a supply voltage of 0 is required.
TLC3702ID Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC3702ID Applications
There are a lot of Texas Instruments TLC3702ID linear comparators applications.
- Handheld Instruments
- General Purpose Low Voltage Applications
- Wearable Devices
- Self-diagnostics
- Notebooks and PDAs
- DC/DC and AC/DC power supplies
- Window Comparators
- Portable Battery Monitoring
- Current and voltage sensing
- Lithium ion battery monitoring
