TLC3702IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702IP Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, Push-Pull, TTL is being used.Ready for shipping in Tube package.You can find 8 terminals of the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .In total, it contains 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount using type Through Hole .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.You can search TLC3702 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 65μA .Mounting on PCBs or other boards is easy with the Through Hole .Electronic comparator is recommended that the nominal supply current of the device be 40μA .An excess of current supply over 20μA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.Comparator electronics is part of the LinCMOS? comparator series.A normal operation requires a voltage of 5V .
TLC3702IP Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC3702IP Applications
There are a lot of Texas Instruments TLC3702IP linear comparators applications.
- Portable Battery Monitoring
- General-Purpose Portable Devices
- Laptop Computers
- Power Supervision
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- Analog front end
- Automotive
- Hand-Held Electronics
- Multivibrators and High-Voltage Digital Logic Gates
