TLC3702IPW
| Parameters | |
|---|---|
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
TLC3702IPW Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.A comparator with an output type of CMOS, Push-Pull, TTL is being used.Ready for shipping in Tube package.The comparator has 8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.This is a 2 element comparator.The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.Try search TLC3702 to get more pin-to-pin solutions for your special needs.A quiescent current of 65μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 40μA supply current.A current supply greater than 20μA may cause the comparator to malfunction.The device can be powered by 5V power supplies.The maximal current your can input into the device is 5pA .The part is from LinCMOS? comparator series.For normal operation, there should be 5V operating supply voltage applied.
TLC3702IPW Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC3702IPW Applications
There are a lot of Texas Instruments TLC3702IPW linear comparators applications.
- DC/DC and AC/DC power supplies
- Limit Comparators
- Analog front end
- Portable Battery Monitoring
- Handheld Instruments
- Mobile Phones
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- Security Detection Systems
