TLC3702IPWRG4
| Parameters | |
|---|---|
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Input Bias Current | 5pA |
TLC3702IPWRG4 Overview
A convenient transport package is provided in 8-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.A total of 8 pins are included.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.You can search TLC3702 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 65μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 40μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 40μA .This device requires 5V power supplies to operate.A comparator part from the LinCMOS? series is used in this part.The operating supply voltage for normal operation should be 5V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC3702IPWRG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC3702IPWRG4 Applications
There are a lot of Texas Instruments TLC3702IPWRG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Mobile Communications
- Ultra-Low Power Systems
- Infotainment & cluster
- Simple Analog-to-Digital Converters (ADCs)
- Portable Battery Monitoring
- Power Supervision
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
