TLC3702MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 90μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 90μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702MD Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.Ready for shipping in Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .This comparator has 8 pins.You can find more pin-to-pin solutions by searching TLC3702 .This comparator presents a quiescent current of 90μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 40μA for normal use.A current supply greater than 40μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum current of 5pA into the device.The part belongs to the LinCMOS? series of comparator parts.In order to operate normally, a supply voltage of 0 is required.
TLC3702MD Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 90μA
TLC3702MD Applications
There are a lot of Texas Instruments TLC3702MD linear comparators applications.
- System control and monitoring
- High-Speed Differential Line Receiver
- Appliances
- Infotainment & cluster
- Limit Comparators
- Self-diagnostics
- Pulse, Squarewave, and Time Delay Generators
- Security Detection Systems
- Current and voltage sensing
- Window Comparators
