TLC3702QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 90μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 90μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702QDRG4Q1 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type of this comparator is CMOS, Push-Pull, TTL .Ready for shipping in Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 2 elements in total.The device includes 8 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLC3702 .The comparator displays a quiescent current of 90μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 40μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 40μA .This device requires 5V power supplies to operate.A maximum current of 5pA can be supplied to the device.Comparator electronics is a comparator part from the Automotive, AEC-Q100, LinCMOS? series.The normal operation of the system requires 5V operating voltage.With a TR package, this device is designed for general use (usually in ADC circuits).
TLC3702QDRG4Q1 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TLC3702QDRG4Q1 Applications
There are a lot of Texas Instruments TLC3702QDRG4Q1 linear comparators applications.
- Alarm and Monitoring Circuits
- Lithium ion battery monitoring
- Building automation
- System control and monitoring
- Self-diagnostics
- General-Purpose Portable Devices
- Factory automation & control
- Zero-Crossing Detectors
- Motor drives
- Notebooks and PDAs
