Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
725mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC3702 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
40μA |
Power Dissipation |
725mW |
Output Current |
20mA |
Max Supply Current |
40μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
90μA |
Response Time |
2700 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
4V~16V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00003μA |
Power Supply Rejection Ratio (PSRR) |
84dB |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
90μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC3702QDRQ1 Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.There are 8 pins on this board.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator has a pin count of 8 .You can search TLC3702 if you are looking for more pin-to-pin solutions.There is a quiescent current of 90μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 40μA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 40μA .The device can be powered by 5V power supplies.There is a maximum current that can be input into the device of 5pA .The part belongs to the Automotive, AEC-Q100, LinCMOS? series of comparator parts.Comparator electronics is necessary to have a voltage of 5V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC3702QDRQ1 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TLC3702QDRQ1 Applications
There are a lot of Texas Instruments TLC3702QDRQ1 linear comparators applications.
- Appliances
- Analog front end
- Security Detection Systems
- Set Top Boxes
- Wearable Devices
- Battery management and protection
- Threshold Detectors
- Automotive
- Window Comparators
- Point of load regulators