TLC3702QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 40μA |
| Response Time | 4500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 40μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702QPWRQ1 Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.The comparator has a type CMOS, Push-Pull, TTL output.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 8 .You may wish to search TLC3702 for more solutions that address your specific needs.In this comparator, the quiescent current is 40μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 20μA when using the device.A current supply greater than 40mA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.You are allowed to input a maximum current of 5pA into the device.The part belongs to the series of comparator Automotive, AEC-Q100, LinCMOS? .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLC3702QPWRQ1 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 40μA
TLC3702QPWRQ1 Applications
There are a lot of Texas Instruments TLC3702QPWRQ1 linear comparators applications.
- Factory automation & control
- Threshold Detectors
- Industrial
- High-Speed Differential Line Receiver
- Window Comparators
- DC/DC and AC/DC power supplies
- Current and voltage sensing
- Building automation
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
