TLC3704CDR
| Parameters | |
|---|---|
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
TLC3704CDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has an output type of CMOS, Push-Pull, TTL .The chip is packaged with Tape & Reel (TR) .You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 4 elements in it.The device contains 14 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.There are 14 pins on the comparator.In order to find a solution that meets your specific needs, search TLC3704 for more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 80μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .In order to run the device, there are only 5V power supplies required.A maximum current of 5pA can be supplied to the device.This part is from the LinCMOS? comparator series.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLC3704CDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC3704CDR Applications
There are a lot of Texas Instruments TLC3704CDR linear comparators applications.
- High-Speed Sampling Circuits
- Mobile Communications
- Automatic Test Equipment
- Limit Comparators
- RC Timers
- Portable Battery Monitoring
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Portable and Battery-Powered Systems
- Analog front end
