TLC3704CNSG4

1.1 μs μs Linear Comparators 80μA μA 5mV mV Surface Mount

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC3704CNSG4
Package: SOP
Datasheet: -
Stock: 646
Description: 1.1 μs μs Linear Comparators 80μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	SOP
Number of Pins	14
Weight	208.312296mg
Type	General Purpose
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Output Type	TTL
Operating Supply Voltage	5V
Number of Elements	4
Number of Channels	4
Max Supply Voltage	16V
Min Supply Voltage	3V
Power Dissipation-Max	1.15W
Nominal Supply Current	80μA
Power Dissipation	1.15W
Max Supply Current	80μA
Current - Output	20mA
Propagation Delay	4.5 μs
Quiescent Current	100μA
Response Time	1.1 μs
Common Mode Rejection Ratio	84 dB
Current - Input Bias	5pA
Input Offset Voltage (Vos)	5mV
Power Supply Rejection Ratio (PSRR)	85dB
Radiation Hardening	No
RoHS Status	RoHS Compliant

TLC3704CNSG4 Overview

Electronic comparator is packaged in SOP for convenient transportation.There is a comparator of type TTL output on this device.This is a typical comparator of type General Purpose .There are a total of 4 elements in it.14 pins are present on the comparator.The comparator presents a quiescent current of 100μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.Temperature higher than 70°C is not recommended.Lower temperatures than 0°C are unsuitable for it.The comparator has a maximum supply voltage of 16V .This comparator allows minimum supply voltage of 3V .For the output quality to be maintained, 4 channels work together.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Comparator electronics has an output current rated at 20mA .