TLC3704CNSR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1.15W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 1.15W |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
TLC3704CNSR Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.209, 5.30mm Width) .The comparator has a type CMOS, Push-Pull, TTL output.The part will be shipped by Tape & Reel (TR) .There are 14 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 4 .As a result, it contains 14 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .14 pins are available on the comparator.You may wish to search TLC3704 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 100μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.A current supply greater than 80μA may cause the comparator to malfunction.In order to run the device, there are only 5V power supplies required.The maximal current your can input into the device is 5pA .Comparator electronics is a comparator part from the LinCMOS? series.The normal operation of the system requires 5V operating voltage.Packed in TR , this device is for general uses (often in ADC circuits).
TLC3704CNSR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC3704CNSR Applications
There are a lot of Texas Instruments TLC3704CNSR linear comparators applications.
- Notebooks and PDAs
- Laptop Computers
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Body Control Modules
- Power Supervision
- High-Speed Sampling Circuits
- Point of load regulators
- Set Top Boxes
- Mobile Communications
