banner_page

TLC3704CPWR

Surface Mount Cut Tape (CT) 20mA mA 2700 ns μs Linear Comparators 5pA pA 80μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC3704CPWR
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 360
  • Description: Surface Mount Cut Tape (CT) 20mA mA 2700 ns μs Linear Comparators 5pA pA 80μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 57.209338mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Max Power Dissipation 675mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number TLC3704
Pin Count 14
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Elements 4
Power Supplies 5V
Nominal Supply Current 80μA
Power Dissipation 675mW
Output Current 20mA
Max Supply Current 20μA
Propagation Delay 4.5 μs
Quiescent Current 100μA
Response Time 2700 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 3V~16V
Output Current per Channel 4mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Power Supply Rejection Ratio (PSRR) 85dB
Supply Voltage Limit-Max 18V
Max Input Current 5pA
Input Bias Current 5pA
Current - Quiescent (Max) 100μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC3704CPWR Overview


In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.The part is shipped by Cut Tape (CT) .The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as General Purpose .This element consists of 4 elements in total.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching TLC3704 .As a result, this comparator displays a quiescent current of 100μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 80μA .An excess of current supply over 20μA could result in malfunction of the comparator.The device can be operated with 5V power supplies.A maximum current of 5pA can be supplied to the device.The part is based on LinCMOS? .The normal operation of the system requires 5V operating voltage.With a TR package, this device is designed for general use (usually in ADC circuits).

TLC3704CPWR Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA

TLC3704CPWR Applications


There are a lot of Texas Instruments TLC3704CPWR linear comparators applications.

  • Battery-Powered Electronics
  • Power Supervision
  • Zero-Crossing Detectors
  • Laptop Computers
  • Pulse, Squarewave, and Time Delay Generators
  • Power management
  • Wearable Devices
  • Threshold Detectors
  • Mobile Phones and Tablets
  • Portable and Battery-Powered Systems

Write a review

Note: HTML is not translated!
    Bad           Good