banner_page

TLC3704ID

Surface Mount Tube 20mA mA 2700 ns μs Linear Comparators 5pA pA 80μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC3704ID
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 617
  • Description: Surface Mount Tube 20mA mA 2700 ns μs Linear Comparators 5pA pA 80μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 133.412856mg
Operating Temperature -40°C~85°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Max Power Dissipation 950mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number TLC3704
Pin Count 14
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Elements 4
Power Supplies 5V
Nominal Supply Current 80μA
Power Dissipation 950mW
Output Current 20mA
Max Supply Current 20μA
Propagation Delay 4.5 μs
Quiescent Current 125μA
Response Time 2700 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 3V~16V
Output Current per Channel 4mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Power Supply Rejection Ratio (PSRR) 85dB
Supply Voltage Limit-Max 18V
Input Bias Current 5pA
Current - Quiescent (Max) 125μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC3704ID Overview


In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, TTL output type for this comparator.The part will be shipped by Tube .There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 4 elements.The device contains 14 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .14 pins are present on the comparator.You can search TLC3704 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 125μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.An excess of current supply over 20μA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.The part is based on LinCMOS? .A normal operation requires a voltage of 5V .

TLC3704ID Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA

TLC3704ID Applications


There are a lot of Texas Instruments TLC3704ID linear comparators applications.

  • Factory automation & control
  • Wearable Devices
  • High-Speed Sampling Circuits
  • Self-diagnostics
  • Metering Systems
  • Simple Analog-to-Digital Converters (ADCs)
  • Pulse, Squarewave, and Time Delay Generators
  • Power Supervision
  • Battery management and protection
  • Set Top Boxes

Write a review

Note: HTML is not translated!
    Bad           Good