Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
133.412856mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
950mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
950mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
125μA |
Response Time |
2700 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
4mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00003μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
125μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC3704IDG4 Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Push-Pull, TTL output.The chip is packaged with Tube .There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 4 elements in it.As a result, it contains 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLC3704 for more pin-to-pin solutions.There is a quiescent current of 125μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 20μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .5V power supplies are enough to run the device.Input current to the device is limited to 5pA .The part is based on LinCMOS? .The normal operation of the system requires 5V operating voltage.
TLC3704IDG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC3704IDG4 Applications
There are a lot of Texas Instruments TLC3704IDG4 linear comparators applications.
- Window Comparators
- Metering Systems
- System control and monitoring
- Infotainment & cluster
- Battery management and protection
- Building automation
- Industrial
- Multivibrators and High-Voltage Digital Logic Gates
- Power management
- Zero-Crossing Detectors