TLC3704IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3704IDR Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.We ship the part through Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 4 elements in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 14 .In case you are looking for more pin-to-pin solutions, you may want to search TLC3704 .A quiescent current of 125μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 80μA .A supply current exceeding 20μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.There is a maximum current that can be input into the device of 5pA .The part belongs to the series of comparator LinCMOS? .Comparator electronics is necessary to have a voltage of 5V for normal operation.This device is usually used in ADC circuits (packaged in TR ).
TLC3704IDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC3704IDR Applications
There are a lot of Texas Instruments TLC3704IDR linear comparators applications.
- Window Comparators
- Battery-Powered Electronics
- Mobile Phones
- Wide Range VCO; MOS Clock Timers
- High-Speed Differential Line Receiver
- Security Detection Systems
- Infotainment & cluster
- Metering Systems
- Body Control Modules
- Motor drives
