TLC3704IN
| Parameters | |
|---|---|
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.15W |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 1.15W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
TLC3704IN Overview
In order to make transportation easier, it is packaged in 14-DIP (0.300, 7.62mm) .Output type CMOS, Push-Pull, TTL is used for this comparator.The chip is packaged with Tube .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 14 pins on the comparator.In order to find a solution that meets your specific needs, search TLC3704 for more pin-to-pin solutions.A quiescent current of 125μA is observed in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 80μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.A comparator part from the LinCMOS? series is used in this part.Comparator electronics is necessary to have a voltage of 5V for normal operation.
TLC3704IN Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC3704IN Applications
There are a lot of Texas Instruments TLC3704IN linear comparators applications.
- Self-diagnostics
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Appliances
- DC/DC and AC/DC power supplies
- Threshold Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Zero-Crossing Detectors
- Security Detection Systems
- Battery-Powered Electronics
