TLC3704INE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.15W |
| Nominal Supply Current | 80μA |
| Power Dissipation | 1.15W |
| Max Supply Current | 80μA |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 4.5 μs |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 5pA |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Bias Current-Max (IIB) @25C | 0.002μA |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC3704INE4 Overview
A convenient packaging is provided in the form of PDIP .Output type TTL is used for this comparator.The chip is packaged with Rail/Tube .You can find 14 terminals of the comparator.Other Comparator like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a General Purpose chip.The device contains 14 pins.14 pins are present on the comparator.A quiescent current of 125μA is observed in this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 80μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 80μA .5V power supplies are enough to run the device.Temperatures above 85°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .There is a maximum voltage supply on the comparator of 16V .A voltage of 3V is the minimum supply voltage allowed by this comparator.In order to maintain the quality of the output, 4 channels cooperate together.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.The output current of this device is rated 20mA .
TLC3704INE4 Features
TTL output capability
General Purpose IC
Quiescent Current: 125μA
TLC3704INE4 Applications
There are a lot of Texas Instruments TLC3704INE4 linear comparators applications.
- Building automation
- Point of load regulators
- Window Comparators
- Automotive
- Consumer Medical Electronics
- General Purpose Low Voltage Applications
- Mobile Communications
- Appliances
- Wide Range VCO; MOS Clock Timers
- Portable Battery Monitoring
