TLC3704IPWG4
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 675mW |
| Nominal Supply Current | 80μA |
| Power Dissipation | 675mW |
| Max Supply Current | 80μA |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 4.5 μs |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 5pA |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
TLC3704IPWG4 Overview
A convenient packaging is provided in the form of TSSOP .Output type TTL is used for this comparator.The chip is packaged with Rail/Tube .There are14 terminals on the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .As a result, it contains 14 pins.14 pins are available on the comparator.A quiescent current of 125μA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 80μA .An excess of current supply over 80μA could result in malfunction of the comparator.The device can be run with 5V power supplies.There is no need to exceed 85°C in terms of temperature.Temperatures below -40°C are not suitable for the device.16V is the maximum supply voltage of the comparator.This comparator allows minimum supply voltage of 3V .To maintain output quality, 4 channels cooperate.The operating supply voltage for normal operation should be 5V .This device's output current is rated at 20mA .
TLC3704IPWG4 Features
TTL output capability
General Purpose IC
Quiescent Current: 125μA
TLC3704IPWG4 Applications
There are a lot of Texas Instruments TLC3704IPWG4 linear comparators applications.
- Industrial
- Motor drives
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- Metering Systems
- Power management
- Consumer Medical Electronics
- Battery management and protection
- Power Supervision
- Factory automation & control
