TLC3704MD
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 127.998097mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
TLC3704MD Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, TTL is used for this comparator.Electronic comparator is shipped by Tube .You can find 14 terminals of the comparator.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.As a result, it contains 14 pins.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -55°C~125°C .There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC3704 .There is 175μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.A supply current exceeding 80μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.Comparator electronics is part of the LinCMOS? comparator series.The normal operation of the system requires 5V operating voltage.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC3704MD Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC3704MD Applications
There are a lot of Texas Instruments TLC3704MD linear comparators applications.
- System control and monitoring
- Power management
- Self-diagnostics
- Battery-Powered Electronics
- Wearable Devices
- Motor drives
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- High-Speed Sampling Circuits
- Body Control Modules
