TLC3704MDR
| Parameters | |
|---|---|
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 127.998097mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
TLC3704MDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, TTL .We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -55°C~125°C in order to prevent malfunctions.The comparator has a pin count of 14 .Try search TLC3704 to get more pin-to-pin solutions for your special needs.There is 175μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 80μA .The compartator could be damaged if the current supply exceeds 80μA .There is sufficient power to run the device from 5V power supplies.Input current to the device cannot exceed 5pA .Comparator electronics is a comparator part from the LinCMOS? series.Normal operation requires 5V operating supply voltage.Packed in TR , this device is for general uses (often in ADC circuits).
TLC3704MDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC3704MDR Applications
There are a lot of Texas Instruments TLC3704MDR linear comparators applications.
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Current and voltage sensing
- General-Purpose Portable Devices
- System control and monitoring
