Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
133.412856mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
950mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
950mW |
Output Current |
20mA |
Max Supply Current |
80μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
175μA |
Response Time |
2700 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
4V~16V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.03μA |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
30nA |
Current - Quiescent (Max) |
175μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
TLC3704MDRG4 Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .This device is designed in Tape & Reel (TR) case.There are14 terminals on the comparator.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 4 elements in total.The device includes 14 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .The comparator is equipped with 14 pins.You can search TLC3704 if you are looking for more pin-to-pin solutions.There is a quiescent current of 175μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.A power supply of 5V is sufficient for the operation of the device.A maximum current of 5pA can be supplied to the device.Comparator electronics is a comparator part from the LinCMOS? series.The operating supply voltage for normal operation should be 5V .
TLC3704MDRG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC3704MDRG4 Applications
There are a lot of Texas Instruments TLC3704MDRG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Limit Comparators
- Point of load regulators
- System control and monitoring
- General-Purpose Portable Devices
- Infotainment and Clusters
- Mobile Communications
- Alarm and Monitoring Circuits
- Metering Systems