TLC3704QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3704QDRG4Q1 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a type CMOS, Push-Pull, TTL output.This package has been designed with Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.Electronic comparator has 14 pins.You can find more pin-to-pin solutions by searching TLC3704 .The comparator presents a quiescent current of 175μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.The output quality is maintained by the cooperation of 4 channels.Comparator electronics comes from the series of Automotive, AEC-Q100, LinCMOS? comparator parts.Normal operation requires 5V operating supply voltage.Comparator electronics is acceptable to pack the device by TR .
TLC3704QDRG4Q1 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 175μA
TLC3704QDRG4Q1 Applications
There are a lot of Texas Instruments TLC3704QDRG4Q1 linear comparators applications.
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Analog front end
- Window Comparators
- Set Top Boxes
- Appliances
- Notebooks and PDAs
- Building automation
- Laptop Computers
- Mobile Communications
