Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
950mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, TTL |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Channels |
4 |
Nominal Supply Current |
80μA |
Power Dissipation |
950mW |
Output Current |
20mA |
Max Supply Current |
80μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
175μA |
Response Time |
1100 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00003μA |
Power Supply Rejection Ratio (PSRR) |
84dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
175μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC3704QDRQ1 Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.This device is designed in Tape & Reel (TR) case.The comparator has 14 terminals.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .The device is equipped with 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .This comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TLC3704 .A quiescent current of 175μA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 80μA .An excess of current supply over 80μA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.Input current to the device is limited to 5pA .4 channels cooperate together to maintain the output quality.The part is from Automotive, AEC-Q100, LinCMOS? comparator series.For normal operation, the operating supply voltage must be 5V .Packed in TR , this device is for general uses (often in ADC circuits).
TLC3704QDRQ1 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 175μA
TLC3704QDRQ1 Applications
There are a lot of Texas Instruments TLC3704QDRQ1 linear comparators applications.
- Self-diagnostics
- Infotainment and Clusters
- Infotainment & cluster
- General-Purpose, Low-Voltage Applications
- Portable Battery Monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Automotive
- General Purpose Low Voltage Applications
- Window Comparators, Multivibrators
- Current and voltage sensing