TLC372CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 150μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Ambient Temperature Range High | 70°C |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372CDR Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, MOS, Open-Drain, TTL .This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical Differential .The device is equipped with 8 pins.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching TLC372 .A quiescent current of 400μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 150μA supply current.Current supply exceeding 150μA could cause disfunction of the compartator.5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 5pA into the device.This part is from the LinCMOS? comparator series.The device is packaged in TR and is often used in ADC circuits.
TLC372CDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC372CDR Applications
There are a lot of Texas Instruments TLC372CDR linear comparators applications.
- Battery management and protection
- System control and monitoring
- Window Comparators
- Self-diagnostics
- Handheld Instruments
- Battery-Powered Electronics
- Limit Comparators
- General Purpose Low Voltage Applications
- Consumer Medical Electronics
- Mobile Phones and Tablets
