TLC372CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372CP Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has an output type of CMOS, MOS, Open-Drain, TTL .This package has been designed with Tube .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type Differential .The pinout of the component starts from 8 pins it has.Through Hole universial mout for easy adapting.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator consists of 8 pins.You can search TLC372 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 400μA .A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 300μA .A supply current exceeding 150μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.A maximum current of 5pA can be supplied to the device.A comparator part from the LinCMOS? series is used in this part.For normal operation, the operating supply voltage must be 15V .
TLC372CP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC372CP Applications
There are a lot of Texas Instruments TLC372CP linear comparators applications.
- DC/DC and AC/DC power supplies
- Limit Comparators
- Lithium ion battery monitoring
- Threshold Detectors
- Building automation
- Current and voltage sensing
- Wireless Base Stations
- Metering Systems
- Motor drives
- Portable Battery Monitoring
