TLC372CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372CPW Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.The part will be shipped by Tube .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type Differential .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator has 8 pins.You can find more pin-to-pin solutions by searching TLC372 .There is a quiescent current of 400μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 300μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 150μA .The device can be powered by 5V power supplies.A comparator part from the LinCMOS? series is used in this part.For normal operation, there should be 15V operating supply voltage applied.
TLC372CPW Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC372CPW Applications
There are a lot of Texas Instruments TLC372CPW linear comparators applications.
- Window Comparators, Multivibrators
- Mobile Communications
- RC Timers
- Handheld Instruments
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Building automation
- Power Supervision
