TLC372CPWG4

650 ns μs Linear Comparators 300μA μA 5mV mV Surface Mount

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC372CPWG4
Package: TSSOP
Datasheet: PDF
Stock: 992
Description: 650 ns μs Linear Comparators 300μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	TSSOP
Number of Pins	8
Weight	39.008944mg
JESD-609 Code	e4
Moisture Sensitivity Level (MSL)	1
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Subcategory	Comparator
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Pin Count	8
Output Type	TTL
Operating Supply Voltage	15V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Number of Channels	2
Max Supply Voltage	16V
Min Supply Voltage	3V
Nominal Supply Current	300μA
Max Supply Current	150μA
Current - Output	20mA
Quiescent Current	400μA
Response Time	650 ns
Amplifier Type	COMPARATOR
Current - Input Bias	20nA
Output Current per Channel	6mA
Input Offset Voltage (Vos)	5mV
Average Bias Current-Max (IIB)	0.0006μA
Max Dual Supply Voltage	8V
Min Dual Supply Voltage	1.5V
Max Input Current	5pA
Dual Supply Voltage	5V
Height	1.15mm
Length	3mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

TLC372CPWG4 Overview

To facilitate transportation, it comes packaged in TSSOP .The comparator has an output type of TTL .8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator has 8 pins.Electronic comparator has 8 pins.There is 400μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.If the current supply exceeds 150μA , the comparator could malfunction.The device can be powered by 5V power supplies.Input current to the device cannot exceed 5pA .Comparator electronics is not recommended to maintain a temperature above 125°C .Lower temperatures than -40°C are unsuitable for it.A comparator is designed to operate at a maximum supply voltage of 16V .There is a minimum supply voltage of 3V for this comparator.For the output quality to be maintained, 2 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.Comparator electronics is necessary to have a voltage of 15V for normal operation.This device's output current is rated at 20mA .