TLC372CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372CPWR Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.This package has been designed with Cut Tape (CT) .As you can see, the comparator has8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as Differential .Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search TLC372 for more pin-to-pin solutions.The comparator displays a quiescent current of 400μA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 300μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 150μA .In order to operate the device, 5V power supplies are sufficient.Electronic comparator is possible to input up to 5pA current into the device.Comparator electronics is part of the LinCMOS? comparator series.Packed in TR , this device is for general uses (often in ADC circuits).
TLC372CPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC372CPWR Applications
There are a lot of Texas Instruments TLC372CPWR linear comparators applications.
- Battery-Powered Electronics
- Notebooks and PDAs
- High-Speed Differential Line Receiver
- Simple Analog-to-Digital Converters (ADCs)
- Multivibrators and High-Voltage Digital Logic Gates
- Wearable Devices
- Window Comparators
- Body Control Modules
- Consumer Medical Electronics
- Power management
