TLC372CPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 20nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372CPWRG4 Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical Differential .Electronic comparator has a total of 2 elements.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search TLC372 for more pin-to-pin solutions.This comparator presents a quiescent current of 400μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 300μA for normal use.If the current supply exceeds 150μA , the comparator could malfunction.The device can be run with 5V power supplies.A maximum current of 5pA can be supplied to the device.This part is from the LinCMOS? comparator series.Comparator electronics is acceptable to pack the device by TR .
TLC372CPWRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 400μA
TLC372CPWRG4 Applications
There are a lot of Texas Instruments TLC372CPWRG4 linear comparators applications.
- Infotainment & cluster
- System control and monitoring
- Battery-Powered Electronics
- Battery management and protection
- Self-diagnostics
- General-Purpose Portable Devices
- DC/DC and AC/DC power supplies
- Power Supervision
- Metering Systems
- Threshold Detectors
