banner_page

TLC372ID

Surface Mount Tube 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC372ID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 867
  • Description: Surface Mount Tube 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~85°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Differential
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC372
Pin Count 8
Output Type CMOS, MOS, Open-Drain, TTL
Operating Supply Voltage 15V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 300μA
Output Current 20mA
Max Supply Current 150μA
Quiescent Current 400μA
Response Time 650 ns
Voltage - Supply, Single/Dual (±) 3V~16V ±1.5V~8V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Max Input Current 5pA
Dual Supply Voltage 5V
Input Bias Current 5pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 5pA @ 5V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC372ID Overview


The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.We ship the part through Tube .There are 8 terminals on the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical Differential comparator.There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLC372 .There is a quiescent current of 400μA in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 300μA .Current supply exceeding 150μA could cause disfunction of the compartator.There is sufficient power to run the device from 5V power supplies.There is a maximum current that can be input into the device of 5pA .This part is from the LinCMOS? comparator series.In order to operate normally, a supply voltage of 0 is required.

TLC372ID Features


CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLC372ID Applications


There are a lot of Texas Instruments TLC372ID linear comparators applications.

  • Mobile Phones
  • Self-diagnostics
  • Automotive
  • System control and monitoring
  • Window Comparators
  • Pulse, Squarewave, and Time Delay Generators
  • General-Purpose, Low-Voltage Applications
  • Infotainment and Clusters
  • Factory automation & control
  • Wide Range VCO; MOS Clock Timers

Write a review

Note: HTML is not translated!
    Bad           Good