Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC372 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
150μA |
Output Current |
20mA |
Max Supply Current |
150μA |
Quiescent Current |
400μA |
Response Time |
200 ns |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00003μA |
Dual Supply Voltage |
5V |
Input Bias Current |
5pA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
5pA @ 5V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC372IDRG4 Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.The part will be shipped by Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as Differential .This element consists of 2 elements in total.A total of 8 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 8 .Try search TLC372 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 400μA .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 150μA .A supply current exceeding 150μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.The part is based on LinCMOS? .A normal operation requires a voltage of 15V .The device is packaged in TR and is often used in ADC circuits.
TLC372IDRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC372IDRG4 Applications
There are a lot of Texas Instruments TLC372IDRG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Handheld Instruments
- RC Timers
- Security Detection Systems
- Lithium ion battery monitoring
- Mobile Phones and Tablets
- Wireless Base Stations
- DC/DC and AC/DC power supplies
- Hand-Held Electronics
- Limit Comparators