TLC372IP
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
TLC372IP Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.As a result, it is designed with Tube package.There are 8 terminals on the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical Differential comparator.The device contains 8 pins.The recommended mounting method is Through Hole .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .8 pins are available on the comparator.You may wish to search TLC372 for more solutions that address your specific needs.The comparator presents a quiescent current of 400μA volts.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 300μA .If the current supply exceeds 150μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.Input current to the device is limited to 5pA .The part belongs to the series of comparator LinCMOS? .Normal operation requires 15V operating supply voltage.
TLC372IP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under -40°C~85°C
Quiescent Current: 400μA
TLC372IP Applications
There are a lot of Texas Instruments TLC372IP linear comparators applications.
- Ultra-Low Power Systems
- Alarm and Monitoring Circuits
- Consumer Medical Electronics
- Threshold Detectors
- Hand-Held Electronics
- Handheld Instruments
- DC/DC and AC/DC power supplies
- Set Top Boxes
- General Purpose Low Voltage Applications
- Body Control Modules
