TLC372MDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372MDR Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a CMOS, MOS, Open-Drain, TTL output.Ready for shipping in Tape & Reel (TR) package.8 terminals are found on the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as Differential .There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -55°C~125°C .Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search TLC372 for more options.The comparator presents a quiescent current of 400μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.If the current supply exceeds 300μA , the comparator might be damaged.The device can be operated with 5V power supplies.Input current to the device cannot exceed 5pA .A comparator part from the LinCMOS? series is used in this part.The device is acceptable to pack by TR .
TLC372MDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 400μA
TLC372MDR Applications
There are a lot of Texas Instruments TLC372MDR linear comparators applications.
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Consumer Medical Electronics
- Limit Comparators
- Hand-Held Electronics
- Self-diagnostics
- Portable and Battery-Powered Systems
- Security Detection Systems
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
