TLC372MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372MDREP Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as Differential .The total number of elements is 2 .A total of 8 pins are included.A Surface Mount mounting type is recommended.The operating temperature should be set to -55°C~125°C to avoid mal-function.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search TLC372 for more options.This comparator presents a quiescent current of 400μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 300μA .If the current supply exceeds 300μA , the comparator could malfunction.The device can be operated with 5V power supplies.A maximum current of 5pA can be supplied to the device.A comparator part from the LinCMOS? series is used in this part.Comparator electronics is acceptable to pack the device by TR .
TLC372MDREP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 400μA
TLC372MDREP Applications
There are a lot of Texas Instruments TLC372MDREP linear comparators applications.
- High-Speed Differential Line Receiver
- Mobile Communications
- Security Detection Systems
- Battery management and protection
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Appliances
- Multivibrators and High-Voltage Digital Logic Gates
- Factory automation & control
